Acoustic Emission Handheld, Battery Powered Signal Generator
Meet FieldCAL, our newest unit allowing you to produce all the Acoustic Emission signals necessary to verify the correct operation of AE Sensors, Preamplifiers and AE Systems.
MISTRAS Products & Systems newest addition to its line of Acoustic Emission (AE) products is the FieldCAL, a low cost, small hand held battery powered AE signal generator. This unit can produce all the AE signals necessary to verify the correct operation of AE sensors, preamplifiers and AE systems.
Five different waveforms are pre-programmed into the unit including Standard AE Waveforms, 3 Tone Bursts and continuous sine waves. Output amplitude can be set in 10dB increments from 30dB to 90dB, with a choice of four different frequencies covering the AE range. The output level of the FieldCAL is adjustable to the signal level of an AE sensor, a 26dB or a 40dB preamplifier.
The FieldCAL unit operates for approximately one month of daily use on two standard AA batteries. The membrane switch overlay protects the system from dirt and grime in the field and LEDs allow for easy use in low light environments.
Features:
• Easy to use, easy to set-up
• Maintains previous settings on power-up.
• Small Handheld battery powered system
• Compatible with standard AE sensors, preamplifiers and systems.
• Can be used for the verification of AE sensors, preamplifiers and systems.
• Can also be used as a pulse or waveform generator for Acousto-Ultrasonics or guided wave applications.
• Uses two standard AA batteries providing approximately one month of daily use.
• Generates five types of AE calibration signals, i.e. a standard AE signal with calibrated rise and fall time; three tone burst sine wave with length in 100 μs, 1 ms and 10 ms respectively; a continuous sine wave.
• Outputs AE waveforms at four frequencies: 30 kHz, 60 kHz, 150 kHz and 300 kHz.
• Outputs AE waveforms at seven different amplitudes. Peak waveform amplitude can be set for 30dB, 40dB, 50dB, 60dB 70dB, 80dB or 90dB.
• Outputs AE waveforms at four different repetition rates: 1 pps, 10 pps, 100 pps and manual trigger.
• Three user selectable test ranges including a range for a sensor, a 26dB preamplifier and a 40dB preamplifier.
CLICK HERE for a specification sheet (PDF)
Related articles
- Good Green Hunting - Managing Steam Systems with Ultrasound
- Sound Collectors, Can You Hear Me Now?
- Establishing Ultrasound Testing as a CBM Pillar Part 2
- Ultrasound Worth It’s Weight in Gold
- Detecting Bearing Faults Part 2
- Establishing Ultrasound Testing as a CBM Pillar
- Lets Talk About Compressed Air Leakage
- Detecting Bearing Faults
- Pick It Up and Use It
- Out of Sight, Out of Mind - Problems With Dust Extraction
- Alignment and Balancing
- Asset Management
- CMMS and EAM
- Green Reliability
- Human Asset Management
- Infrared Thermal Imaging
- KPIs - Reliability Performance Metrics
- Lean Maintenance
- Lubrication
- Maintenance Management
- Motor and Power System Testing
- MRO - Spares Management
- Oil and Fluid Analysis
- Planning and Scheduling
- PM Optimization
- Predictive Maintenance and Condition Monitoring Management
- Reliability-Centered Maintenance
- Reliability Engineering
- Reliability Leadership
- Root Cause Analysis
- Shutdowns and Turnarounds
- Total Productive Maintenance (Asset Care)
- Training
- Ultrasonics
- Vibration Analysis
- Motor Testing Books
- R300S for When Good Enough – Isn’t Enough!
- New AT33IND Perfect for QC & Troubleshooting
- MRO Inventory and Purchasing Books
- GPAllied Inspired Training: Hard-Hitting, Impactful Courses and Workshops.
- Reliability Centered Maintenance for SAP Plant Maintenance
- Reliability Engineering Services
- Job Postings for Maintenance and Reliability Professionals
- Total Productive Maintenance Books
- IR Windows: Compare and Save with Exiscan
- Commtest - Affordable Vibration Analysis
- Join The Association For Maintenance Professionals
- Belt/Sheave Alignment Laser, Custom Shim and Gaskets