Visite nuestro sitio en Español: Confiabilidad.net    RSS | Contact

Testing AC Variable Frequency Drives

November 21, 2011
(Motor and Power System Testing)

It is possible to test your motors online using Current Signature Analysis (CSA) and Electrical Signature Analysis (ESA) with VFD’s controlling your motors. When performing this analysis downstream of the VFD, you have to take into account the fundamental frequency supplied to the motor from the VFD. Using both CSA and ESA, you get valuable information on the health of your motor and the VFD itself. By setting the motor up with two profiles, one for the input and one for the output section of the VFD, you can monitor and trend the health of the input/output semi-conductors, plus the gate drive circuit output of the inverter.

When you are performing offline testing, always remember to disconnect your VFD from the motor.

Tip provided by: PdMA Corporation

Pdma Logo

Previous tip: Vacuum Dehydration vs Traditional Water Removal Techniques
Next tip: Technology Doesn’t Replace Leadership

« Back to all maintenance tips

Comments (1)

  • Are there any videos that explain / show how to run this test properly? Much appreciated!
    -Vick

    1) Posted 5:33 pm, 01 December 2011 by VFD

Have your say

Comments are moderated prior to publication.
Please fill out the fields below.
Email addresses will never be published.

Comment guidelines

You can use basic HTML (a, strong, em, blockquote).
Links automatically use the nofollow attribute.
Off-topic or inappropriate comments will be edited or deleted.

Knowledge Base Articles
Advertisement